English | português | русский| Español

Our company

hebeihaihao

Hebei haihao high pressure flange & pipe fitting group was established in 1982, located in Mengcun County the hometown of pipe fittings in China.


Read More About Haihao Group

API 5L Grade X70 Carbon Steel Seamless Line Pipes & Tubes


API 5L Grade X70 Carbon Steel Seamless Pipes & Tubes
API 5L Grade X70 Carbon Steel Seamless Pipes & Tubes

The American Petroleum Institute specification API 5L covers seamless and welded steel line pipe. This is steel pipe for pipeline transportation systems in the petroleum and natural gas industries. API 5L is suitable for conveying gas, water, and oil. Size range is limited only by manufacturer’s capabilities.

Specifications for API 5L adhere to the International Organization for Standardization ISO 3183, which standardizes pipeline transportation systems within the materials, equipment and offshore structures for petroleum, petrochemical, and natural gas industries.

The technical committee authoring the standards recognized that there are two basic Product Specifications Levels (PSL) of technical requirements and therefore developed PSL 1 and PSL 2. PSL 1 is a standard quality for line pipe where PSL 2 contains additional chemical, mechanical properties, and testing requirements.

Grades covered by this specification are A25 ,A ,B (and the following “X” Grades), X42, X46, X52, X56, X60, X65, X70, X80. The two digit number following the “X” indicates the Minimum Yield Strength (in 000’s psi) of pipe produced to this grade.

Steel Standard
Steel Grade
chemical composition
API 5L mechanical property
C
Mn
P
S
yield strength/Mpa
Tensile Strength/Mpa
Elongation %
API SPECY5L
A
0.21
0.6
0.03
0.03
207
331
0
B
0.22
1.2
0.025
0.015
241
414
 
X42
0.22
0.025
0.015
1.3
290
414
 
X46
0.22
1.4
0.025
0.015
317
434
 
X52
0.22
1.4
0.025
0.015
359
455
 
X56
0.22
1.4
0.025
0.015
386
490
 
X60
0.22
1.4
0.025
0.015
414
517
 
X65
0.22
1.45
0.025
0.015
448
531
 
X70
0.22
1.65
0.025
0.015
483
565
 
GB/T9711-1997
L175
0.21
0.6
0.03
0.03
175
315
27
L210
0.21
0.9
0.03
0.03
210
335
25
L245
0.26
1.15
0.03
0.03
245
415
21
L290
0.28
1.25
0.03
0.03
290
415
21
L360
0.3
1.25
0.03
0.03
360
460
19
L390
0.26
1.35
0.03
0.03
390
490
18
L415
0.26
1.35
0.03
0.03
415
520
17
L450
0.26
1.4
0.03
0.03
450
525
17
L485
0.23
1.6
0.03
0.03
485
570
16
SY/T5037-2000
Q235B
0.12-0.20
0.30-0.70
0.045
0.045
235
375-460
26

The purpose of API 5L Pipe is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries. Haihao Group applies this specification to both seamless and welded steel line pipe. Haihao Group supplies pipes with plain-ends, with ends suitable for threading as well as pipe with ends prepared for use with special couplings.

The API 5l specification establishes requirements for two product specification levels (PSL1 and PSL2). These two PSL designations define different levels of standard technical requirements. PSL 2 has mandatory requirements for carbon equivalent, notch toughness, maximum yield strength and maximum tensile strength. The PSL designation has to be defined by the customer at the time of order placement.

Haihao Group will produce pipes to PSL 1 if no PSL level has been defined at the time of order placement. All EEW Group pipe mills are licensed to apply the API Monogram to products complying with the API 5L Specification.

API 5L Carbon Steel Seamless Pipes & Tubes This specification covers seamless and welded steel line pipe. It includes standard-weight and extra-strong threaded line pipe. It includes standard-weight and extra-strong threaded line pipe; and standard-weight plain-end, regular-weight plain-end, special plain-end, extra-strong plain-end, special plain-end, extra-strong plain-end pipe; as as well as bell and spigot and through-the-flow line(TFL) pipe. The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.

Sizes (Seamless): 1/2″ NB – 60″ NB Sizes (ERW): 1/2″ NB – 24″ NB Sizes (SAW): 16″ NB – 100″ NB

Wall Thickness: Schedule 10 through 160, STD, XS, XXS.

<< Back to Steel pipes


Share to: LinkedIn Twitter Facebook Google


Related Tags: API 5L (8)  API 5L Line Pipe (8)  

API 5L Grade X70 Carbon Steel Seamless Line Pipes & Tubes Related Posts :
ASTM A106 Seamless Carbon Steel Pipe for High-Temperature Service
EN P235GH steel for use in pressure vessels, boilers and heat exchangers
GB 20 carbon seamless steel pipe
API 5L Grade X52 Carbon Steel Seamless Line Pipes & Tubes
JIS G3455 STPG370 Carbon steel pipe
GOST 20295-85 K52 Seamless Steel Pipe
DIN 17100 St 37-2 common carbon structure steel pipe
DIN2440 ST33.2 seamless carbon steel pipe and tube
API 5L Grade X65 Carbon Steel Seamless Line Pipes & Tubes
ASTM A671 CC65 Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

Haihao Group Twitter haihao group youtube haihao group facebook haihao group linkedin